L.A. Maritime Services
L.A. Maritime Performs 420t Proof Load Test on NASSCO Lift Beam
- Company Details
- Products & Services
- White Papers
- Press Releases
- Regional Offices
- Contact Company
L.A. Maritime Performs 420t Proof Load Test on NASSCO Lift BeamL.A. Maritime Services
On 22 November 2014, L.A. Maritime performed a 420t load test at the General Dynamics-NASSCO shipyard in San Diego, California, on a NASSCO-built spreader beam designed by Hopper Engineering to lift a main engine into the hull of a new build ECO-class tanker vessel.
Seven weeks of calculations and discussions with NASSCO and Hopper culminated with the building of two H-frames to support the massive test weights, as well as the purchase of 3,000ft of hose to fill the waterbags.
The H-frames were linked one above the other, each rigged to accommodate six bags filled to 35t, for a total of 12 bags (420t). The entire assemblage was attached to the spreader beam.
Then, two cranes working in tandem lifted the spreader bar, the H-frames, and the attached weights a little at a time so each of the four successive layers of waterbags could be filled with sea water evenly and simultaneously to the precisely calibrated weight.
L.A. Maritime project manager and industrial engineer Sven Buck said: "We worked closely with Hopper Engineering to create the test procedure and the arrangement of the waterbags. L.A. Maritime provided the test weights, load cells, flow meters, shackles, slings, hoses, test record and four service engineers. Hopper Engineering designed the spreader bar, the H-frames, and wrote the test procedure. NASSCO built the spreader beam and was responsible for all rigging."
Close cooperation of three companies assured the successful completion of a complex operation in only 20 hours. "Very nice job," said the NASSCO facility manager.
L.A. Maritime provides offshore operators, ship yards and shipping customers with the speediest possible service by operating service hubs in Houston, Miami, New York, New Orleans, Vancouver, Bahamas and its home base in Los Angeles.
Since beginning business in 2003 by providing service on marine diesel engines, president Dieter Liebich, a master mariner and mechanical engineer, has grown the business to include inspections on lifeboats and davits, general ship repair, sale of spare parts and LSA equipment, crew training, service on marine and offshore cranes, and technical consultation.